ALP 91 Allround Cleaning Concentrate for Ultrasound-Cleaning-Devices

€50.60

€10.12 / kg

Tax excluded

Universal Cleaning Concentrate for Ultrasonic Cleaning Devices

ALP91 is a mildly acidic cleaning concentrate designed for degreasing parts and surfaces made of stainless steel, ceramic, aluminum, and non-ferrous metals.

Unit

5 Kg
15 Kg
25 Kg

Quantity

Ask about product

This information is based on the latest technical knowledge and serves as general guidance without specific warranties. Refer to our safety data sheets for precautions and storage instructions. Users are responsible for conducting required tests. Consider any applicable industrial property rights.

For special pricing (eg. on larger order quantities), please don't hesitate to reach out to our sales team through our contact form or by email!

Applications

ALP91 is a mildly acidic cleaning concentrate for degreasing parts and surfaces made of stainless steel, ceramic, aluminum, and non-ferrous metals. Specifically designed for use in dip, flood, and ultrasonic baths, ALP91 effortlessly removes drawing greases, oils, and general dirt in a very short time while being gentle on the materials. Due to its acidic pH, ALP91 has brightening properties on aluminum and non-ferrous metals, gently removing oxide layers.

Corrosion Protection

ALP91 does not contain corrosion inhibitors to prevent oxidation on corrosion-sensitive surfaces.

How to Use

Inject into cleaning baths using an appropriate dosing system (time-controlled, quantity proportional).

Concentration: 0.5 – 3.0%
Temperature: 50 – 80°C
Spray pressure: 0 bar
Exposure time: 2– 6 minutes

Depending on the quality requirements of the cleaned parts, all wetted areas must be thoroughly rinsed with water, deionized water, or distilled water to completely remove residues.

For corrosion-sensitive parts, a corrosion inhibitor must be dosed into the final rinse bath.

Material Compatibility

Stainless steel, glass, PVC, PVDF, PP, PE, ceramic, aluminum, and to a limited extent non-ferrous metals.

Caution

ALP91 should not be used on steel and cast iron, as well as tinned materials. Furthermore, other material incompatibilities cannot be completely ruled out. Therefore, a test should be carried out on an inconspicuous area before use.

Concentration Determination

As per titration instructions

Physical and Chemical Properties

Property	Value
Appearance/Color	Clear, Colorless – Slightly Brownish
Form	Liquid
Odor	Characteristic
Foaming Behavior (under application conditions)	Weakly foaming
Phosphates	Contained
Density (20°C) g/cm³	1.096 – 1.116
pH-Value (1%, 20°C)	2.1 – 2.7
Conductivity (1%, 20°C) mS/cm	1.4 – 1.9
p-Value (ml)	3.8 ± 0.3 (1% at 10 ml sample)
Storage Stability	+ 5°C to + 40°C

Special Notes

Always close the container with the original cap and store the containers cool and without exposure to sunlight. Never pour already removed product back into the container. It is essential to observe the notes in our safety data sheet before use!